AIR SYSTEMS
RESIDENTIAL MAINTENANCE PROGRAM
air
Our goal is to ensure the satisfaction and trust of our customers. To achieve this, we have created this maintenance program for the air conditioning equipment in your home. We provide extra options designed to meet different needs and preferences for HVAC services
Welcome to the Air Systems Maintenance Program
We are glad you are taking the next step in protecting and prolonging the lifecycle of your air conditioning unit.
Learn more about the program discounts and benefits below!
WHAT’S INCLUDED
- Check thermostat operation and reset reminders
- Inspect connections and wires in Air Handler
- Look At filtration – change/wash filters (customer supplied)
- Verify sensing bulb is mounted and secure
- Check temperature splits across evaporator coil
- Visually check for leaks at plenum
- Examine blower wheel for cleanliness
- Check heat strip amps, circuit components & safety
- Wipe down interior and exterior of Air Handler cabinet
- Add algaecide treatment to condensate pan
- Flush and vacuum drain line/pan and evaluate drainage**
- Inspect all safety floats are operational
- Look at evaporator coil for cleanliness
- Scan system for proper refrigerant charge
- Check reversing valve operation
- Look at the compressor crankcase heater if applicable
- Inspect defrost cycle
- Look at condenser motor bearings for wear
- Scan compressor and condenser fan motor amps
- Explorer contactor points to ensure proper continuity
- Look at capacitors for proper capacitance rating
- Examine electrical connections and wires in condenser unit
- Visually check condenser fan blade
- Look at controls and safety devices
- Inspect all caps and valves for seals and proper snug fit
- Check condenser level
- Verify that system is working properly at time of completion
- Written report of performance and recommendations
- Check thermostat operation and reset reminders
- Inspect connections and wires in Air Handler
- Look At filtration – change/wash filters (customer supplied)
- Verify sensing bulb is mounted and secure
- Check temperature splits across evaporator coil
- Visually check for leaks at plenum
- Examine blower wheel for cleanliness
- Check heat strip amps, circuit components & safety
- Wipe down interior and exterior of Air Handler cabinet
- Add algaecide treatment to condensate pan
- Flush and vacuum drain line/pan and evaluate drainage**
- Inspect all safety floats are operational
- Look at evaporator coil for cleanliness
- Scan system for proper refrigerant charge
- Check reversing valve operation
- Look at the compressor crankcase heater if applicable
- Inspect defrost cycle
- Look at condenser motor bearings for wear
- Scan compressor and condenser fan motor amps
- Explorer contactor points to ensure proper continuity
- Look at capacitors for proper capacitance rating
- Examine electrical connections and wires in condenser unit
- Visually check condenser fan blade
- Look atcontrols and safety devices
- Inspect all caps and valves for seals and proper snug fit
- Check condenser level
- Verify that system is working properly at time of completion
- Written report of performance and recommendations
**Fully impacted drain lines will require a service call at an additional fee.
One of our agents will contact you in less than 24 hours to set your appointment.
*Monday to friday
*If you have more than 1 unit, write to us to learn more about our benefits.
- 24/7 EMERGENCY calls ONLY for our maintenance program customers
- Preferential treatment in scheduling all emergency or problems calls over non-agreement customers
- You will receive a 10% discount on defective parts discovered during the routine inspection or emergency calls. *This discount does not apply to Equipment or Accessories.
- Maintenance Agreement Customers also received priority in scheduling of any replacement equipment.
- Peace of mind. We remind you when your maintenance is due and contact you to set up the service.
- 24/7 EMERGENCY calls ONLY for our maintenance program customers
- Preferential treatment in scheduling all emergency or problems calls over non-agreement customers
- You will receive a 10% discount on defective parts discovered during the routine inspection or emergency calls. *This discount does not apply to Equipment or Accessories.
- Maintenance Agreement Customers also received priority in scheduling of any replacement equipment.
- Peace of mind. We remind you when your maintenance is due and contact you to set up the service.
We work with all major brands!
We are the best in HVAC services
Referral program. Invite customers to refer their friends and family. If someone joins the maintenance program through a referral, you could both receive a special discount on your next service.